Your Top Floor Is Not Hot Because of Sunlight.

It’s Infrared Heat Entering Your Roof.

Your AC is not failing. Your roof is absorbing thermal energy all day and pushing it directly into your living space. **IR STUNNER blocks that heat at the source.**

Fast Execution • Guaranteed Reduction
14°C Roof Reduction
Ceiling Under 30°C
Proven Tropical Tech

The Real Reason Your Room Stays Hot - Even with AC

You shut the windows. You blast the AC. Yet, the heat returns in minutes. The air isn’t the issue. The culprit is your roof.

The Hard Reality

The Myth

Standard AC only cools the air in your room.

VS

The Reality

Your roof slab is a giant radiator pumping heat in.

AC alone is a losing battle. Block the heat at the source.

How IR STUNNER Works

IR STUNNER doesn’t cool your room.
It stops heat from entering in the first place.

Working Principle

Sun sends infrared radiation (heat). Normal roofs act as a sponge, absorbing this heat.

IR STUNNER forms an impenetrable barrier, blocking this radiation entirely at the surface.

The Result

Lower Heat Input → Cooler Interiors

!

We are not reducing heat after it enters. We are stopping it from entering at all.

Normal Paint
Appearance Only
VS
IR STUNNER
Active Thermal Barrier

Visualizing The Heat Barrier

Interactive Radiation Shield: Heat Deflection in Real-Time

31°C
Infrared Blocked

Before IR STUNNER

59°C

Uncomfortable Zone (Ceiling: 36°C)

With IR STUNNER

45°C

Comfort Zone (Ceiling: 29°C)
14°C Roof Drop
7°C Interior Drop
< 30°C Comfort Level

This is not just a temperature drop; it's a fundamental reduction in heat energy entering your building. **Less AC load, lower power bills, and stable indoor comfort.**

Technical Specifications

Dosage 200g per 20L paint
Paint Type Exterior Acrylic Emulsion
Application 2 Coats Mandatory
Coverage 500–600 sq ft (Double Coat)
Drying Time Touch: 4h | Recoat: 12h
Performance Max Thermal Reflectivity

Execution Determines Performance

Swipe through our 3D process guide for a zero-heat result.

01
Surface Preparation

Surface Preparation

A professional result starts with a surgical-grade foundation.

  • Debris Removal : Thoroughly clear dust, dirt, and moss.
  • Dry Substrate : Ensure the roof is bone-dry before application.
  • Stability Check : Verify the base coating is firm and not flaking.
02
Mixing

Mixing & Dosage (Critical)

The secret is in the mechanical blend. Performance is 100% dependent on this step.

  • Mechanical Mixing : Highly recommended for 15–20 minutes.
  • No Lumps : Dispersion must be absolutely uniform for thermal blocking.
  • Standard Dosage : Follow strict paint-to-additive ratios.
Poor mixing causes total thermal failure. Do not rush.
03
Application

Dual-Layer Application

Create a continuous infrared shield with two mandatory coatings.

  • First Coat : Apply evenly across the entire surface area.
  • Curing Period : Allow a minimum of 8–12 hours to set.
  • Second Coat : Apply uniformly to finalize the thermal barrier.
04
Final Quality Check

Technical Verification

Final inspection for architectural-grade performance.

  • Visual Audit : Check for zero patchiness or thin spots.
  • Consumption Check : Verify that the full intended dosage was used.
  • Ready State : The roof is now an active infrared defense system.

If heat remains after application, the barrier has failed — not the concept.

Questions & Answers

Does it reduce AC load?

Yes. Less heat entering = less cooling required.

Will it work in Chennai coastal climate?

Yes. Proper surface preparation is critical.

Does paint brand matter?

No, as long as it is good quality exterior emulsion.

Why not just use white paint?

White paint reflects visible light. Infrared heat still enters the slab. IR STUNNER reduces that heat transfer.

EXCLUSIVE CHENNAI LAUNCH

Get IR STUNNER
FOR FREE.

We are proofing 50 homes in Chennai to demonstrate our 14°C surface drop. Claim a full thermal audit and product barrier application at zero cost.

LAUNCH SPOTS REMAINING 12 / 50 HOMES
Scientific Audit Tool
OFFICIAL PARTNER PROGRAM

Become an IR STUNNER Dealer

Turn high-temperature problems into high-margin business opportunities.

01

Identify the Problem

Find buildings with hot top floors or failing AC units.

02

Prove the System

Show measurable heat reduction with thermal tools.

03

Close & Scale

Implement the thermal barrier and repeat across your territory.

Who This is For

Designed for experts who understand building performance.

Paint & Coating Dealers

Add thermal performance to your product portfolio.

Waterproofing Specialists

Perfect upsell for roof restoration projects.

HVAC & Energy Experts

Reduce cooling loads and increase client ROI.

Hardware & Tech Re-sellers

High-demand product for tropical markets.

IR STUNNER

Exploring thermal peaks,
one barrier at a Time.

GUARANTEED HEAT REJECTION

High-Performance Shielding // Certified Energy Insulation

Get in Touch

IR Stunner AI Expert